EXTRUMEX offers a practical and easy to install system of highdensity polyethylene for the conduction of underground wiring.
This type of pipeline produced by extrusion, offers superior advantages over other pipes of traditional materials. It has a wide range of fittings made with compatible polyethylene resins in dimension, strength and adaptability. The butt fusion joint system is a practical, safe and fast way to work in the field allowing going forward in the cheapiest possible way.
Our raw material PE 4710, PE 100 meets American Standards (USA) and its listed in PPI (Plastic Pipe Institute).
- Impact resistence
- Butt fusion joint
- Fittings and accessories
- Abrasion resistance
- Resistance to the weather
- Low friction coefficient
- Compatibility with other systems
|Piping for Electrical Wiring|
|Standard Presentation||Nominal Measure||External diameter||Wall Thickness (in)
|In.||In.||SDR 11||SDR 13.5||SDR 15.5||SDR 17||SDR 21
|500 ft Coil||1 1/4||0.83||0.15||0.12||0.11||0.10||0.08
|500 ft Coil||1 1/2||1.04||0.17||0.14||0.12||0.11||-9.00
|500 ft Coil||2||1.30||0.21||0.18||0.15||0.14||0.11
|500 ft Coil||2 1/2||1.65||0.26||0.21||0.18||0.17||0.14
|500 ft Coil||3||1.88||0.32||0.26||0.22||0.20||0.16
|48/50 ft Long||4||2.35||0.41||0.33||0.29||0.26||0.21
|48/50 ft Long||6||2.85||0.60||0.49||0.42||0.39||0.31
|48/50 ft Long||8||3.47||0.77||0.63||0.55||0.50||0.41
|48/50 ft Long||10||4.46||0.97||0.79||0.69||0.63||0.51
|48/50 ft Long||12||6.56||1.15||0.94||0.82||0.74||0.60
* In case of requiring special measures and SDR’s please consult the plant.
|GENERAL PROPERTIES||PE 3608||PE 4710||PE 100|
|Density of natural resin (G / CM)||0.940-0.947||0.947-0.955||0.930-...|
|Fluency index (G / 10MIN)||0.01-0.15||0.01-0.15||0.01-0.10|
|Bending module (MPA)||552-758||758-1103||552-1103|
|Effort to tension (MPA)||21-24||21-24||21-28|
|Resistance to slow cracking (Hours)||100-...||500-...||2000|
|Hydrostatic design effort (MPA)||5.52-...||6.90-...||5.52-...|
|Content of carbon black (%)||2-3||2-3||2-3|